Expo Prepz

Annoucements and Discussions for ITR Expo 10 at Autobahn Country Club

Moderators: White Dragon, Dave-ROR

cheezthis
Stripe = Awesome Gremlin
Posts: 476
Joined: November 12th, 2002, 1:15 am
Location: Chicago, IL

Re: Expo Prepz

Post by cheezthis »

If you can fit a case in your car, let me know :)
96ls
ITRCA Member
Posts: 416
Joined: May 23rd, 2006, 3:26 pm
Location: sandy lake, PA

Re: Expo Prepz

Post by 96ls »

Doespike wrote:Yuengling grows on trees here...just remind me, srsly 8)
same here! I should have plenty of room in my car for a case or two.
00 PY ???? Still trying to find her badge number.
TurboLS
ITRCA Member
Posts: 110
Joined: September 13th, 2008, 12:20 pm
Location: Columbia, MD
Contact:

Re: Expo Prepz

Post by TurboLS »

I may sport some kronenbourg for this event...
[url]http://www.automotivespecialtytool.net[/url]
Peer to Peer Renting and Lending of Specialty Tools for a Variety of Machines

2000 ITR Daily
jgirard
New ITRCA Member
Posts: 25
Joined: July 17th, 2007, 4:44 pm

Re: Expo Prepz

Post by jgirard »

jgirard wrote: Anybody have a link to the tech inspection form? I must have missed it
Anybody??? I can't find it anywhere
get RIGHT
Senior ITRCA Member
Posts: 1192
Joined: September 23rd, 2005, 9:45 pm
Location: sellin you a Honda

Re: Expo Prepz

Post by get RIGHT »

jgirard wrote:
jgirard wrote: Anybody have a link to the tech inspection form? I must have missed it
Anybody??? I can't find it anywhere
Heres the one from last year. It'll be the same this year.
http://www.itrexpo.com/Expo9-Info-Packet.pdf
Doespike
Half way to a cool title.
Posts: 3542
Joined: April 2nd, 2006, 9:26 pm
Location: Buffalo, NY

Re: Expo Prepz

Post by Doespike »

^^ Yep :thumbup:
-Joe - ITR RegistRar
98-0309...Born 1/22/1998.
ITR Expo!
98integrals
New ITRCA Member
Posts: 21
Joined: December 17th, 2005, 2:17 pm
Location: Schoolcraft MI

Re: Expo Prepz

Post by 98integrals »

Well... Add changing a radiator support to my list. My brother tried to bumpdraft a cobalt at a stop sign.

The good news is I think I've finally fixed the no crank issue on the car for good
cheezthis
Stripe = Awesome Gremlin
Posts: 476
Joined: November 12th, 2002, 1:15 am
Location: Chicago, IL

Re: Expo Prepz

Post by cheezthis »

Whoa, radiator support? How bad? I hope you can make it out, Jack.
98integrals
New ITRCA Member
Posts: 21
Joined: December 17th, 2005, 2:17 pm
Location: Schoolcraft MI

Re: Expo Prepz

Post by 98integrals »

It is driveable as is fortunatly. It didn't even scratch the bumper but the hood is bent a tiny bit and the rad support is pushed back about a 1/4"
coolhandluke
401R
Posts: 2489
Joined: December 12th, 2005, 2:36 pm
Location: SC
Contact:

Re: Expo Prepz

Post by coolhandluke »

Ouch, I'm sorry to hear that. You can get a radiator in time correct?
WTB: ODB1 VTEC Distributor!!!!!!!!!!!

2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
98integrals
New ITRCA Member
Posts: 21
Joined: December 17th, 2005, 2:17 pm
Location: Schoolcraft MI

Re: Expo Prepz

Post by 98integrals »

I could if I needed one, or the Integra could donate one for the weekend lol. I think most people could look @ the front of the car and not even tell it hit something until you tried to open the hood.
TurboLS
ITRCA Member
Posts: 110
Joined: September 13th, 2008, 12:20 pm
Location: Columbia, MD
Contact:

Re: Expo Prepz

Post by TurboLS »

i got a spare OEM integra rad if u want one... i swapped a new mishimoto into the track whore.
[url]http://www.automotivespecialtytool.net[/url]
Peer to Peer Renting and Lending of Specialty Tools for a Variety of Machines

2000 ITR Daily
98integrals
New ITRCA Member
Posts: 21
Joined: December 17th, 2005, 2:17 pm
Location: Schoolcraft MI

Re: Expo Prepz

Post by 98integrals »

As far as i can tell the radiator is fine. I've been driving the car all week and it isn't leaking any more than normal so I think once i get the support swapped out and kick the hood a few times it will be like [almost] new again.
98spec022
ITRCA Member
Posts: 285
Joined: November 18th, 2008, 8:59 am

Re: Expo Prepz

Post by 98spec022 »

Revisited ToDo:

Install new roll bar padding
Replace brake fluid
Install new rear rotors and track pads
Wash car

Almost there!
Doespike
Half way to a cool title.
Posts: 3542
Joined: April 2nd, 2006, 9:26 pm
Location: Buffalo, NY

Re: Expo Prepz

Post by Doespike »

Expo is THIS WEEK!!! :D
I just have to
bleed brakes
swap front rotors/pads
pack
-Joe - ITR RegistRar
98-0309...Born 1/22/1998.
ITR Expo!
coolhandluke
401R
Posts: 2489
Joined: December 12th, 2005, 2:36 pm
Location: SC
Contact:

Re: Expo Prepz

Post by coolhandluke »

Revised list:

-Pickup new front Duralast rotors (on hold)
-Install XR3's
-Install Rear GTS's
-Clean/vacuum interior
-Wash/rain-x exterior

My list is looking much better. :)
WTB: ODB1 VTEC Distributor!!!!!!!!!!!

2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
Doespike
Half way to a cool title.
Posts: 3542
Joined: April 2nd, 2006, 9:26 pm
Location: Buffalo, NY

Re: Expo Prepz

Post by Doespike »

Yeah it is...nothing about installing trannies or pulling head :P
-Joe - ITR RegistRar
98-0309...Born 1/22/1998.
ITR Expo!
Willard
SLEESTACK
Posts: 1285
Joined: November 12th, 2002, 10:00 am
Location: Charlotte

Re: Expo Prepz

Post by Willard »

My list is shorter!
I should wrap things up tomorrow night in the garage.

-flush brake fluid
-install track rotors/pads (front)
-install wheels & tires
-start packing!!
-:)
'84 242ti (bent, in storage)
'04 Pilot EX
'08 Fit sport
#01-0154 PY = sold :(
{9 ITR Expo's IAR!!}
AssPenny
New ITRCA Member
Posts: 24
Joined: November 11th, 2002, 12:28 pm

Re: Expo Prepz

Post by AssPenny »

My list is really short...

- Pack drinking shoes
- Print airplane ticket

Craig - Who will see you fuckers there!
HondaRcB
New ITRCA Member
Posts: 26
Joined: December 5th, 2002, 10:54 am
Location: Virginia

Re: Expo Prepz

Post by HondaRcB »

Finally finished installing torque mount inserts today. I found a thread on honda-tech from 2001 which gave me the advice I need for that damn rear mount. Car feels good.

To do:
Wash, pack, figure out why the cigarette lighter doesn't work, find and install Spoon N1 silencer, and maybe buy ear plugs.
ITR 98-0324
CONEV8R
New ITRCA Member
Posts: 11
Joined: April 21st, 2010, 12:25 am
Contact:

Re: Expo Prepz

Post by CONEV8R »

My list has shrunken significantly, though I keep adding more items!

All I have left to do is:

- swap the left-rear tail light once it arrives (should be Wednesday, hopefully)
- swap wheels and tires
- clean and vacuum interior
- give her a bath
- pack
- wake up and drive
Erik95LS
Banjo Viking
Posts: 6268
Joined: May 11th, 2003, 1:54 pm
Location: Where rock is criminal......criminals rock!

Re: Expo Prepz

Post by Erik95LS »

-change oil
-add moar stickARRRz
-pack
-Erik

"i sneezed and jam came out" - R-Box
coolhandluke
401R
Posts: 2489
Joined: December 12th, 2005, 2:36 pm
Location: SC
Contact:

Re: Expo Prepz

Post by coolhandluke »

Psst Dave. Where are my stickers?
WTB: ODB1 VTEC Distributor!!!!!!!!!!!

2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
96specr
New ITRCA Member
Posts: 29
Joined: January 2nd, 2008, 9:38 pm
Location: GA

Re: Expo Prepz

Post by 96specr »

I will bring yuengling too!!!

I just have to pack now
CONEV8R
New ITRCA Member
Posts: 11
Joined: April 21st, 2010, 12:25 am
Contact:

Re: Expo Prepz

Post by CONEV8R »

Ooohhh....Yeungling is pretty good stuff. I'm going to be bringing some Dogfish Head IPA, and possibly a couple other varieties. Any special requests from Virginia/DC? Old Dominion perhaps?
Locked