Expo Prepz
Moderators: White Dragon, Dave-ROR
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: Expo Prepz
If you can fit a case in your car, let me know
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
Re: Expo Prepz
same here! I should have plenty of room in my car for a case or two.Doespike wrote:Yuengling grows on trees here...just remind me, srsly
00 PY ???? Still trying to find her badge number.
-
- ITRCA Member
- Posts: 110
- Joined: September 13th, 2008, 12:20 pm
- Location: Columbia, MD
- Contact:
Re: Expo Prepz
I may sport some kronenbourg for this event...
[url]http://www.automotivespecialtytool.net[/url]
Peer to Peer Renting and Lending of Specialty Tools for a Variety of Machines
2000 ITR Daily
Peer to Peer Renting and Lending of Specialty Tools for a Variety of Machines
2000 ITR Daily
Re: Expo Prepz
Anybody??? I can't find it anywherejgirard wrote: Anybody have a link to the tech inspection form? I must have missed it
-
- Senior ITRCA Member
- Posts: 1192
- Joined: September 23rd, 2005, 9:45 pm
- Location: sellin you a Honda
Re: Expo Prepz
Heres the one from last year. It'll be the same this year.jgirard wrote:Anybody??? I can't find it anywherejgirard wrote: Anybody have a link to the tech inspection form? I must have missed it
http://www.itrexpo.com/Expo9-Info-Packet.pdf
-
- New ITRCA Member
- Posts: 21
- Joined: December 17th, 2005, 2:17 pm
- Location: Schoolcraft MI
Re: Expo Prepz
Well... Add changing a radiator support to my list. My brother tried to bumpdraft a cobalt at a stop sign.
The good news is I think I've finally fixed the no crank issue on the car for good
The good news is I think I've finally fixed the no crank issue on the car for good
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: Expo Prepz
Whoa, radiator support? How bad? I hope you can make it out, Jack.
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- New ITRCA Member
- Posts: 21
- Joined: December 17th, 2005, 2:17 pm
- Location: Schoolcraft MI
Re: Expo Prepz
It is driveable as is fortunatly. It didn't even scratch the bumper but the hood is bent a tiny bit and the rad support is pushed back about a 1/4"
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: Expo Prepz
Ouch, I'm sorry to hear that. You can get a radiator in time correct?
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
-
- New ITRCA Member
- Posts: 21
- Joined: December 17th, 2005, 2:17 pm
- Location: Schoolcraft MI
Re: Expo Prepz
I could if I needed one, or the Integra could donate one for the weekend lol. I think most people could look @ the front of the car and not even tell it hit something until you tried to open the hood.
-
- ITRCA Member
- Posts: 110
- Joined: September 13th, 2008, 12:20 pm
- Location: Columbia, MD
- Contact:
Re: Expo Prepz
i got a spare OEM integra rad if u want one... i swapped a new mishimoto into the track whore.
[url]http://www.automotivespecialtytool.net[/url]
Peer to Peer Renting and Lending of Specialty Tools for a Variety of Machines
2000 ITR Daily
Peer to Peer Renting and Lending of Specialty Tools for a Variety of Machines
2000 ITR Daily
-
- New ITRCA Member
- Posts: 21
- Joined: December 17th, 2005, 2:17 pm
- Location: Schoolcraft MI
Re: Expo Prepz
As far as i can tell the radiator is fine. I've been driving the car all week and it isn't leaking any more than normal so I think once i get the support swapped out and kick the hood a few times it will be like [almost] new again.
Re: Expo Prepz
Revisited ToDo:
Install new roll bar padding
Replace brake fluid
Install new rear rotors and track pads
Wash car
Almost there!
Install new roll bar padding
Replace brake fluid
Install new rear rotors and track pads
Wash car
Almost there!
-
- Half way to a cool title.
- Posts: 3542
- Joined: April 2nd, 2006, 9:26 pm
- Location: Buffalo, NY
Re: Expo Prepz
Expo is THIS WEEK!!!
I just have to
bleed brakes
swap front rotors/pads
pack
I just have to
bleed brakes
swap front rotors/pads
pack
-Joe - ITR RegistRar
98-0309...Born 1/22/1998.
ITR Expo!
98-0309...Born 1/22/1998.
ITR Expo!
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: Expo Prepz
Revised list:
-Pickup new front Duralast rotors (on hold)
-Install XR3's
-Install Rear GTS's
-Clean/vacuum interior
-Wash/rain-x exterior
My list is looking much better.
-Pickup new front Duralast rotors (on hold)
-Install XR3's
-Install Rear GTS's
-Clean/vacuum interior
-Wash/rain-x exterior
My list is looking much better.
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
-
- Half way to a cool title.
- Posts: 3542
- Joined: April 2nd, 2006, 9:26 pm
- Location: Buffalo, NY
Re: Expo Prepz
Yeah it is...nothing about installing trannies or pulling head
-Joe - ITR RegistRar
98-0309...Born 1/22/1998.
ITR Expo!
98-0309...Born 1/22/1998.
ITR Expo!
Re: Expo Prepz
My list is shorter!
I should wrap things up tomorrow night in the garage.
-flush brake fluid
-install track rotors/pads (front)
-install wheels & tires
-start packing!!
-:)
I should wrap things up tomorrow night in the garage.
-flush brake fluid
-install track rotors/pads (front)
-install wheels & tires
-start packing!!
-:)
'84 242ti (bent, in storage)
'04 Pilot EX
'08 Fit sport
#01-0154 PY = sold
{9 ITR Expo's IAR!!}
'04 Pilot EX
'08 Fit sport
#01-0154 PY = sold
{9 ITR Expo's IAR!!}
Re: Expo Prepz
My list is really short...
- Pack drinking shoes
- Print airplane ticket
Craig - Who will see you fuckers there!
- Pack drinking shoes
- Print airplane ticket
Craig - Who will see you fuckers there!
Re: Expo Prepz
Finally finished installing torque mount inserts today. I found a thread on honda-tech from 2001 which gave me the advice I need for that damn rear mount. Car feels good.
To do:
Wash, pack, figure out why the cigarette lighter doesn't work, find and install Spoon N1 silencer, and maybe buy ear plugs.
To do:
Wash, pack, figure out why the cigarette lighter doesn't work, find and install Spoon N1 silencer, and maybe buy ear plugs.
ITR 98-0324
Re: Expo Prepz
My list has shrunken significantly, though I keep adding more items!
All I have left to do is:
- swap the left-rear tail light once it arrives (should be Wednesday, hopefully)
- swap wheels and tires
- clean and vacuum interior
- give her a bath
- pack
- wake up and drive
All I have left to do is:
- swap the left-rear tail light once it arrives (should be Wednesday, hopefully)
- swap wheels and tires
- clean and vacuum interior
- give her a bath
- pack
- wake up and drive
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: Expo Prepz
Psst Dave. Where are my stickers?
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
Re: Expo Prepz
I will bring yuengling too!!!
I just have to pack now
I just have to pack now
Re: Expo Prepz
Ooohhh....Yeungling is pretty good stuff. I'm going to be bringing some Dogfish Head IPA, and possibly a couple other varieties. Any special requests from Virginia/DC? Old Dominion perhaps?