I have a '97 and I also have a set of Prelude(non-sh) wheels and I was wondering how I could find the correct size Azenis to offset the change in size from the stock 15's to the 16's and the change in width.
Thanks
Fitment and Tires
Fitment and Tires
'97 ITR
#0076
#0076
http://www.miata.net/garage/tirecalc.html
Use this.
based on going from a 195/55/15 stock to a 16" wheel you will need a 205/45/16
Trey
Use this.
based on going from a 195/55/15 stock to a 16" wheel you will need a 205/45/16
Trey
I have 215/45R16 Azenis. You are safe with either... the 205s are a bit smaller than stock, the 215s are a bit bigger, but both differences are negligible (the 215 is just a bit closer to stock). Here's another good link for wheel/tire sizing (including offset values...although some are slightly incorrect - i.e. 43mm Volks are actually 42mm).
http://www.g-speed.com/pbh/wheels.html
http://www.g-speed.com/pbh/wheels.html
Re: Fitment and Tires
hows the ride compared with either..i was thinking getting a set in the future..can u email me a pic or post them on ur CW itritr0076 wrote:I have a '97 and I also have a set of Prelude(non-sh) wheels and I was wondering how I could find the correct size Azenis to offset the change in size from the stock 15's to the 16's and the change in width.
Thanks
98 CW ITR #0884
-Spoon Sports & JDM mods
--oem kit & fogs
-JDM 16" CW ITR wheels, Recaros
luv u neene!
-Spoon Sports & JDM mods
--oem kit & fogs
-JDM 16" CW ITR wheels, Recaros
luv u neene!
Yeah I couldn't givre you and estimation of the ride because I also have skunk2 adjustable coilovers, koni shocks, and mugen swaybars so I could tell you but not much. However, I will show the pictures, im not sure if I will paint them white or black though, and I will not do it until spring...
'97 ITR
#0076
#0076