FS: JDM ITR Recaros
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
FS: JDM ITR Recaros
For Sale: Extremely nice set of Red JDM ITR Red Recaros puchased from ICB Motorsports in April of 09'. The Passengerside seat has minimal wear and fade. The driverside seat is in extremely good condition. The driverside seat rail was brand new on arrival. Neither seat has any rips or cigarette burns.
The seats have under EDM ITR Seat covers the entire time of ownership. The seat covers were removed for these pictures and installed directly after. I have personally driven less than 7k in these seats since their purchase. The car has been garaged the entire time.
The (USDM) Passengerside seat has minimal wear and fade. (USDM)The driverside seat is in extremely good condition. The driverside seat rail was brand new on arrival.
Driverside:
Passengerside:
Price: $1100
EDM ITR Recaro Seat Covers are available for an additional $150:
The seats have under EDM ITR Seat covers the entire time of ownership. The seat covers were removed for these pictures and installed directly after. I have personally driven less than 7k in these seats since their purchase. The car has been garaged the entire time.
The (USDM) Passengerside seat has minimal wear and fade. (USDM)The driverside seat is in extremely good condition. The driverside seat rail was brand new on arrival.
Driverside:
Passengerside:
Price: $1100
EDM ITR Recaro Seat Covers are available for an additional $150:
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
-
- Half way to a cool title.
- Posts: 2371
- Joined: September 5th, 2006, 9:39 pm
- Location: Strip Club Capital, North Carolina
Re: FS: JDM ITR Recaros
Damn dude you weren't kidding, they are mint.
To any prospective buyer I'll let you know those seat covers DO NOT come off. Even with constant bantering with his friends calling him "grandma" and such I have never seen them removed.
Those things are seriously pretty.
To any prospective buyer I'll let you know those seat covers DO NOT come off. Even with constant bantering with his friends calling him "grandma" and such I have never seen them removed.
Those things are seriously pretty.
WTB: Gunmetal USDM ITR Wheels
-
- Senior ITRCA Member
- Posts: 1445
- Joined: April 14th, 2010, 9:47 pm
- Location: NC
Re: FS: JDM ITR Recaros
^lol x2. This is the first time I've actually seen what's under the seat covers. ha!
-Eric
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: FS: JDM ITR Recaros
This is literally the first time I have removed the seat covers for any period of time since their purchase in April 09'. Once the photos were taken the covers were but back on before driving home from the "shoot." I always knew I would eventually upgrade back to a fixed back seat and rollbar setup so i wanted to make sure I took care of them.
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
Re: FS: JDM ITR Recaros
This is the VERY first time I have actually seen them. Never even knew if they were red, or black. Buy with confidence for sure!!! Covers always installed on these.
-
- ITRCA Member
- Posts: 451
- Joined: December 18th, 2008, 7:11 pm
- Location: NORFOLK/NOVA
Re: FS: JDM ITR Recaros
These were hand picked by several mega-anal hardcore ITR professionals, specifically for Mr. Coolhandluke. They were then shipped directly to Ryan overnight from AZ to TN in a DB8 ITR making contact with absolutely nothing except a brand new set of DB8R rear seats and a hand stitched quilt.
Buy with confidence
Buy with confidence
I KILL car thieves.
Re: FS: JDM ITR Recaros
Holymotherofbling!!
Yack-
2002 Honda Challenge H1 Champion
Neptune, Apexi, AEM EMS certified tuner
2002 Honda Challenge H1 Champion
Neptune, Apexi, AEM EMS certified tuner
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS: JDM ITR Recaros
Same quilt that wrapped the wheels for me, and I returned at Expo? That's pretty funny.Little_Nolan wrote:These were hand picked by several mega-anal hardcore ITR professionals, specifically for Mr. Coolhandluke. They were then shipped directly to Ryan overnight from AZ to TN in a DB8 ITR making contact with absolutely nothing except a brand new set of DB8R rear seats and a hand stitched quilt.
Buy with confidence
Nice seats, wish I had another Integra or Civic to use them in.
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- Senior ITRCA Member
- Posts: 1445
- Joined: April 14th, 2010, 9:47 pm
- Location: NC
-
- Half way to a cool title.
- Posts: 2371
- Joined: September 5th, 2006, 9:39 pm
- Location: Strip Club Capital, North Carolina
Re: FS: JDM ITR Recaros
Unless you start mounting machine guns I don't think anything is going to look "gangster" on the fit
WTB: Gunmetal USDM ITR Wheels
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: FS: JDM ITR Recaros
Thank you, and thank you again for the delivering them.Little_Nolan wrote:These were hand picked by several mega-anal hardcore ITR professionals, specifically for Mr. Coolhandluke. They were then shipped directly to Ryan overnight from AZ to TN in a DB8 ITR making contact with absolutely nothing except a brand new set of DB8R rear seats and a hand stitched quilt.
Buy with confidence
Once these sale I'm going a different direction in terms of bling. You will be the first to know. I'v already found a replacement set of fixed back seats in preperation.B18CXr wrote:Holymotherofbling!!
Eric, these will work in a Fit with a different set of rails. IIRC. And don't worry, a Fit can be gangsta....if you "throw some D's on it."
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
-
- ITRCA Member
- Posts: 451
- Joined: December 18th, 2008, 7:11 pm
- Location: NORFOLK/NOVA
Re: FS: JDM ITR Recaros
cheezthis wrote:Same quilt that wrapped the wheels for me, and I returned at Expo? That's pretty funny.Little_Nolan wrote:These were hand picked by several mega-anal hardcore ITR professionals, specifically for Mr. Coolhandluke. They were then shipped directly to Ryan overnight from AZ to TN in a DB8 ITR making contact with absolutely nothing except a brand new set of DB8R rear seats and a hand stitched quilt.
Buy with confidence
Nice seats, wish I had another Integra or Civic to use them in.
Ohh thats the quilt indeed, same one that made the trip to theft recover 97 #322.. if only that quilt could talk
And coolhand dont mention it man, you do enough for the community (and me for that matter) where you are officially exempt from "thank-you's" IMO lol.
These are the cleanest set of used red recaros I have ever seen, and were def. the BEST set at JDMland... pretty certain they came from the same car and were not split up like most are.
I KILL car thieves.
-
- New ITRCA Member
- Posts: 16
- Joined: August 3rd, 2010, 4:52 am
Re: FS: JDM ITR Recaros
If you still have these around January or February, post it up again and I will definitely buy them
-
- ITRCA Member
- Posts: 199
- Joined: July 21st, 2007, 7:33 pm
Re: FS: JDM ITR Recaros
Dam good price to. I would buy these in the blink of an eye if i didn't have 2 builds going right now. GLWS!!!!!!!!
www.jsracing-net.com
www.typeoneracing.com
J's Racing, T1R, Feel's, and Spoon Authorized Distributor.
www.typeoneracing.com
J's Racing, T1R, Feel's, and Spoon Authorized Distributor.
Re: FS: JDM ITR Recaros
I was lucky enough to sit in these seats over the weekend; they're mint yo!
-
- Half way to a cool title.
- Posts: 2371
- Joined: September 5th, 2006, 9:39 pm
- Location: Strip Club Capital, North Carolina
Re: FS: JDM ITR Recaros
with or without the covers? One time a strong gust of wind came through and moved the cover enough to expose a little bit of red, my retna was burned from the red intensity.98spec022 wrote:I was lucky enough to sit in these seats over the weekend; they're mint yo!
WTB: Gunmetal USDM ITR Wheels
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: FS: JDM ITR Recaros
If there is a serious party, I don't mind taking a deposit if a reasonable time table is provided.
Thanks Jeff! Steve-
Thanks Jeff! Steve-
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: FS: JDM ITR Recaros
Deposit received.
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
Re: FS: JDM ITR Recaros
Awesome!!!
-
- New ITRCA Member
- Posts: 14
- Joined: September 7th, 2010, 2:11 pm
Re: FS: JDM ITR Recaros
I have SRDs as well, but my seat belt keeps rubbing against the upper bolsters. Is there a way to remedy this?
Also, are you using a circuit hero shift extension?
Also, are you using a circuit hero shift extension?
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: FS: JDM ITR Recaros
I don't recall there being a rubbing issue, but that could be height/size dependent. In either case, the seat covers would have prevented the seat belt rubbing the seats.
I am not running the circuit hero shift extension. The units used to be made of aluminum (may still be), so an individual in the community ran a custom batch of steel units, and I picked up one. It was a much cheaper alternative to the Fastline shifter.
I am not running the circuit hero shift extension. The units used to be made of aluminum (may still be), so an individual in the community ran a custom batch of steel units, and I picked up one. It was a much cheaper alternative to the Fastline shifter.
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
-
- ITRCA Member
- Posts: 110
- Joined: March 21st, 2010, 10:00 pm
- Location: Montana
-
- New ITRCA Member
- Posts: 14
- Joined: September 7th, 2010, 2:11 pm
Re: FS: JDM ITR Recaros
Thanks Ryan. I sit like a track star, even on my way to work. Maybe that's why my seat belt keeps rubbing against the top of the seat bolsters. Sent you a PM on your Mugen intake and good luck on your sales.coolhandluke wrote:I don't recall there being a rubbing issue, but that could be height/size dependent. In either case, the seat covers would have prevented the seat belt rubbing the seats.
I am not running the circuit hero shift extension. The units used to be made of aluminum (may still be), so an individual in the community ran a custom batch of steel units, and I picked up one. It was a much cheaper alternative to the Fastline shifter.
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: FS: JDM ITR Recaros
My seller is flaking so I am relisting the seats.
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472