ITRCA

1-Bleed the coolant 2-Make sure you used the gasket with the EDELBROCK throttle body 3-Make sure you have the MAP and TPS plugged in to the right sensor (yes they can get flipped flopped) 4-Hopefully you just unbolted the IACV valve and didnt unhook the lines cause you may have the lines backwards a...

The only way to do it is pull the AXLE there is no other trick ive done it a 100 times. You have to pull the axle.

ELD is in the fuse box. ELD code could either be ELD is abd or bad ECU. Code 20 right. As far a speed sensor alot of times when people detail their engine water gets down in the plug and sits in there and screws with the pin connections. Un plug it and clean the connections and reset the ECU and dri...

Possible solenoid they do go bad and still dont throw a code. I would check vtec solenoid assemble screen between assembly and cylinder head. 2-If they just put your head back to gether they may of left something out like the oil control orifices on the end of the cam plates. Check solenoid first an...